JamSport | automotive performance specialists in Northampton
 
01604 75 55 29

Gotech MFI Pro X

Gotech MFI Pro XThe Gotech PRO X engine control unit is our top of the range ECU. This unit features a faster processor than the normal Gotech MFI and PRO ECU and about double the crystal speed. This control unit took the market with a storm due to the good pricing and extreme capabilities. After one year of production the Gotech PRO X unit was already featured in top European magazines.

Gotech PRO X Information and Features

Applications:

  • One, Two, Three, Four, Six and Eight Cylinders with distributor and single coil or coil packs
  • Trigger per event, 60-2, 12-1, 24-1 and TDC pickups
  • Various setup combinations available:
    • 4, 6 and eight Cylinder, One coil and two injector outputs with trigger per event input
    • 4 Cylinder, Two coil and Two injector outputs with crank trigger (60-2, 36-1, 12-1)
    • 6 Cylinder, Three coil and three injector outputs with crank trigger (60-2)
    • 4 Cylinder, Full sequential Four coil and four injector output (60 -2 plus hall effect TDC)
    • 6 Cylinder, Full sequential fuelling and phased ignition (60 -2 plus hall effect TDC)
    • 8 Cylinder, Single coil and distributor
    • 8 Cylinder, Single coil, full sequential injection (60-2 plus hall effect TDC)
    • 8 Cylinder, Two distributor, Phased sequential fuel (60 -2 crank pickup Lexus 1uz)
    • Mazda Rotary Twin and Triple rotor engines (24 -1 Distributor pickup)
  • 2 Gpo outputs can be used for idle control or VVT or boost control.
  • Dedicated fuel pump output
  • Dedicated shift light
  • Launch control (Launch rpm limit, Launch timing retard, Launch time delay)
  • Anti lag available on request

Gotech MFI Pro X package

Gotech Pro X package

The basic kit includes
- Gotech PRO X ecu
- Universal wiring harness
- Software package
- User manual

Dressed looms can be supplied on demand for vehicle specific applications.

Ignition Control Features

Main software display

Gotech MFI Pro X main software display

  • Full Control over ignition timing at preset RPM intervals and 32 load sites
  • Interpolation Between load sites for smooth timing transition
  • Ignition control input provided by engine speed and manifold pressure (TPS also available)
  • Soft touch RPM limiter is provided to prevent dangerously high RPM to be exceeded
  • Ignition is fully programmable using serial link to Pc or laptop
  • Windows based software
  • Timing control up to 12000 rpm

Fuel Injection Features

  • Batch Firing of injectors in mode 0. Phased firing in all other modes except for full sequential modes.
  • Full control over electronic injectors over 32 load sites and preset RPM levels
  • Interpolation Between load sites for smooth transition
  • Able to drive 12x 2ohm injectors or 24x 16 ohm injectors
  • Fuel injector time mapped at 500rpm from startup to 12 000rpm on a 4 cylinder engine
  • Injector time is fully programmable using the windows based Gotech PRO X Tuner software

Sensor inputs

  • Manifold air pressure (Built in 1,5 bar manifold pressure sensor, optional 3,0 bar map sensor available)
  • Intake air temperature
  • Fluid Temperature
  • Throttle Position
  • Engine Speed, crank trigger pickups 60 -2, 36 -1, 12-1. Distributor pickups trigger per event and 24-1. (Pre order ecu for your specific application).
  • Lambda (Closed Loop Control, Wideband compatible on request)

Additional features include

  • Offline tuning
  • Files can be uploaded and stored on your computers hard drive for future use
  • Real time fuel adjustment using the fuel pot. Fuel adjustable by 10% richer and leaner over the - whole range while driving. Real time timing adjustment with the ignition pot allows 10 degrees ignition retard
  • Two GPO outputs for VVT, shift light, idle control, boost control etc
  • Dedicated shift light and fuel pump output
  • Fully adjustable VANOS and double VANOS control for BMW engines
Launch Control Timing retard Map

Gotech MFI Pro X launch timing display

Launch Fuelling map

Gotech MFI Pro X launch fuel map display

GPO maps

Gotech MFI Pro X GPO temperature map display

Gotech MFI Pro X GPO map display

Accelerator fuel map

Gotech MFI Pro X accelerator fuel map display

Software Features

  • Windows based. Can be used with Windows '98 , ME and XP
  • User friendly interface with easy to navigate screens
  • Dash panel for engine monitoring whilst online.
  • Files can be downloaded an retrieved on hard drive
  • Files can be uploaded to the Mini X and saved to the hard drive.
  • Maps can be rapidly changed using the curve function or the all ranges up.
  • Input screens include: Fuel, Ignition, F5 Configuration, Air temp correction, Water temp correction, Battery voltage correction, Accel pump map, Launch control maps and the micro staged fuel map.

Gotech MFI Pro X settings display

Battery Voltage correction

Gotech MFI Pro X battery voltage display

Micro staged fuel map

Gotech MFI Pro Xmicro staged fuel map display

Air temp correction map

Gotech MFI Pro X air temp correction display

Water temp correction map

Gotech MFI Pro X water temp correction display

Online data logging with a sample rate of 30hz. Data is displayed on a user friendly field.

Gotech MFI Pro X online data logging display

Optional extra

ST Labs USB to serial adaptor. Works great on Windows XP.